Bitcoin-Qt frozen catching up/sync with Bitcoin in new ...

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Inadvisably small full node config

Disclaimer: As the subject implies, this is about an inadvisable config. The following is of zero practical use, but like cross-stitch, may be appealing to the random few people interested in such things. Opinions on the futility of this exercise can be considered already noted. Any suggestions to make this more ridiculously small are very welcome. Obviously I'm not running my primary wallet off of this config. It's just for fun.
TLDR: Wow look, my full node fit on a 0.5 CPU with 0.6 GB memory and 25 GB drive... yeah for me!

Background

I used to run a full node a good ways back, but stopped when the old 3rd string laptop I was using to run it was having drive issues. Still the early interest paid dividends as the price has gone exponential. Missing the good ol' days, I wanted to run another node, but really didn't want to do it on any of my work or lab units. My company took a hard stand years ago to prevent interns from mining on spare HW, so running even a full node on my corporate gear is kinda a capitol punishment. Round about this time, I got some spam for some free VPS service for a year. The promotion were really (I mean really wimpy VPSs). Crappy VPS + bitcoind performance tuning = my kind of waste of time.

Goal

My goal (perverse though it may be), is to get bitcoin or other forks running in very small VPSs. Maybe some of the tuning parameters could be used for a docker container or some whipy SOC. The system I was targeting has 0.5 CPU, 0.6 GB of memory and 25 GB of disk.

Observations

I found some interesting things out along the way that may be of interest to people tweeking bitcoind.

dbcache limits

Since I don't have the requisite memory required to run the node, I've limited memory using the dbcache parameter. Settings range from 100 to 150 depending on what other settings I have in place.

0.15.1 mallocs

I don't know what changed in 0.15.1 but it seems much more memory hungry than previous releases. Throughout the tuning process, I continually had either bitcoind quit due to memory allocation failures (logged in debug.log), or the kernel oom_killer take maters into its own hands (logged in /valog/syslog). This looks very similar to an issue that was logged against 0.14.0 that was patched in 0.14.1. My ultimate solution was to downgrade to 0.14.2 which seems to work great.

prune compromise

My initial thoughts were to use prune=550 to use the least amount of disk space possible. I found out that even on 0.14.2 this causes memory to fill up quick. I found making the pruning less aggressive with a setting of prune=10240 seems to be a good compromise for what I need done. This could possibly be an observation error, but the results seemed very reproducable.

blocksonly avoidance

I had thought to save some memory by using blocksonly. For some reason, on 0.14.2, this causes more problems than it solves. I had a hard time finding any config where blocksonly would work. Surprisingly, maxmempool=5 does effectively the same thing for the miserly cost of 5MiB of memory.

serial consoles

Seems ridiculous, but on my VPS, if bitcoind was running full speed, I would have a hard time connecting through SSH. There were other SSH clients and connection methods that seemed to work better. By far the quickest connections when under heavy utilization was to connect directly to serial ports. I wrote a small snippet to enable extended serial console on my systemd install.

canary log

Since logging into my system gobbles up memory, I wanted this config to be as low-touch as possible once in motion. After tooling up the serial ports, I found all the system log messages where peekable without logging into my VPS through my VPS provider. I wrote a small canary script to simply chirp to the serial port every 5 minutes to confirm that bitcoind was indeed alive and kicking.

Scripts

I made a few scripts during the process as the needs arose. They are very utilitarian, and could do with some major overhauls, but they did what I needed done at the time I needed it.
Scripts:

Final config

Here is my final config, that is still syncing, but seems to be stable on 0.14.2
/usbin/nice -n 15 bitcoind \ -dbcache=115 \ -prune=10240 \ -maxmempool=5 \ -daemon /usbin/nohup $HOME/canary.sh $1 300 $USER >/dev/null 2>/dev/null & cPid=$! sudo /usbin/renice -n -5 -p $cPid echo "Canary @ $cPid" 
Memory utilization while syncing seems to be at about 400MiB. Once I'm synced, I expect to retune for dbcache=60 and maxmempool=60.
Projected full blockchain sync completion in (gulp) 30 days. CPU utilization is currently reported between 30-60% but my provider offers boost periods where they unmeeter the VMs. I've gotten it up to 110% on their dashboard, for what its worth.
I'm well beyond the word limit so I'll drop off here, but I'll eventually put the snipits in a github repo in the near future.
PS If anyone knows of some free VPS or Docker hosting services, please chime in.
EDIT: s/VSP/VPS/g - lysdexia
submitted by brianddk to Bitcoin [link] [comments]

Inadvisably small full node config

Disclaimer: As the subject implies, this is about an inadvisable config. The following is of zero practical use, but like cross-stitch, may be appealing to the random few people interested in such things. Opinions on the futility of this exercise can be considered already noted. Any suggestions to make this more ridiculously small are very welcome. Obviously I'm not running my primary wallet off of this config. It's just for fun.
TLDR: Wow look, my full node fit on a 0.5 CPU with 0.6 GB memory and 25 GB drive... yeah for me!

Background

I used to run a full node a good ways back, but stopped when the old 3rd string laptop I was using to run it was having drive issues. Still the early interest paid dividends as the price has gone exponential. Missing the good ol' days, I wanted to run another node, but really didn't want to do it on any of my work or lab units. My company took a hard stand years ago to prevent interns from mining on spare HW, so running even a full node on my corporate gear is kinda a capitol punishment. Round about this time, I got some spam for some free VPS service for a year. The promotion were really (I mean really wimpy VPSs). Crappy VPS + bitcoind performance tuning = my kind of waste of time.

Goal

My goal (perverse though it may be), is to get bitcoin or other forks running in very small VPSs. Maybe some of the tuning parameters could be used for a docker container or some whipy SOC. The system I was targeting has 0.5 CPU, 0.6 GB of memory and 25 GB of disk.

Observations

I found some interesting things out along the way that may be of interest to people tweeking bitcoind.

dbcache limits

Since I don't have the requisite memory required to run the node, I've limited memory using the dbcache parameter. Settings range from 100 to 150 depending on what other settings I have in place.

0.15.1 mallocs

I don't know what changed in 0.15.1 but it seems much more memory hungry than previous releases. Throughout the tuning process, I continually had either bitcoind quit due to memory allocation failures (logged in debug.log), or the kernel oom_killer take maters into its own hands (logged in /valog/syslog). This looks very similar to an issue that was logged against 0.14.0 that was patched in 0.14.1. My ultimate solution was to downgrade to 0.14.2 which seems to work great.

prune compromise

My initial thoughts were to use prune=550 to use the least amount of disk space possible. I found out that even on 0.14.2 this causes memory to fill up quick. I found making the pruning less aggressive with a setting of prune=10240 seems to be a good compromise for what I need done. This could possibly be an observation error, but the results seemed very reproducable.

blocksonly avoidance

I had thought to save some memory by using blocksonly. For some reason, on 0.14.2, this causes more problems than it solves. I had a hard time finding any config where blocksonly would work. Surprisingly, maxmempool=5 does effectively the same thing for the miserly cost of 5MiB of memory.

serial consoles

Seems ridiculous, but on my VPS, if bitcoind was running full speed, I would have a hard time connecting through SSH. There were other SSH clients and connection methods that seemed to work better. By far the quickest connections when under heavy utilization was to connect directly to serial ports. I wrote a small snippet to enable extended serial console on my systemd install.

canary log

Since logging into my system gobbles up memory, I wanted this config to be as low-touch as possible once in motion. After tooling up the serial ports, I found all the system log messages where peekable without logging into my VPS through my VPS provider. I wrote a small canary script to simply chirp to the serial port every 5 minutes to confirm that bitcoind was indeed alive and kicking.

Scripts

I made a few scripts during the process as the needs arose. They are very utilitarian, and could do with some major overhauls, but they did what I needed done at the time I needed it.
Scripts:

Final config

Here is my final config, that is still syncing, but seems to be stable on 0.14.2
/usbin/nice -n 15 bitcoind \ -dbcache=115 \ -prune=10240 \ -maxmempool=5 \ -daemon /usbin/nohup $HOME/canary.sh $1 300 $USER >/dev/null 2>/dev/null & cPid=$! sudo /usbin/renice -n -5 -p $cPid echo "Canary @ $cPid" 
Memory utilization while syncing seems to be at about 400MiB. Once I'm synced, I expect to retune for dbcache=60 and maxmempool=60.
Projected full blockchain sync completion in (gulp) 30 days. CPU utilization is currently reported between 30-60% but my provider offers boost periods where they unmeeter the VMs. I've gotten it up to 110% on their dashboard, for what its worth.
I'm well beyond the word limit so I'll drop off here, but I'll eventually put the snipits in a github repo in the near future.
PS If anyone knows of some free VPS or Docker hosting services, please chime in.
EDIT: s/VSP/VPS/g - lysdexia
submitted by brianddk to BitcoinDiscussion [link] [comments]

Lore v2 QT on Raspberry Pi

Hello,
 
To follow up to mindphuk's excellent piece on building the headless client on Raspberry Pi (https://www.reddit.com/blackcoin/comments/6gkjrw/wip_blackpi_a_stake_device_based_on_raspberry/), I thought if anyone was interested I'd show you how to get the full QT version running on the Pi on the Jessie with Pixel desktop. This works and has been soak tested for several days now on a standard Raspberry Pi 3. I have since added some coins and it stakes a handful of times a day.
 
Running staking Lore clients paves the way for some of the future use cases of BLK utilising the Bitcoin 0.12 (and newer) core tech, including colored coins. So I'm going to leave this one going indefinitely to kickstart the number of Lore clients staking. It's certainly not mandatory but it will be good in the longer term to have a nice distribution of Lore staking clients.
 
The cross-compile which lets you create binaries for multiple platforms didn't work for the QT version on the Pi, so there is more to do than just running the binary unfortunately, as below. There are folks working on some much cleaner solutions than this for the Pi, with a custom front end, and where you won't have to do any mucking about. That is coming soon. In the meantime, if you enjoy a fiddle with such things, here's how to get this QT client working on your Pi.
 
These instructions assume you are starting from scratch with a completely blank OS.
 
Download Jessie with Pixel from: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip
 
Note they have since (August 2017) released a version called 'Stretch' which does not work with this guide. I'll see if I can come up with something new for that at some point and link to it here when I have. In the meantime the guide should work with the Jessie image above.
 
Unzip the file and extract the .img file to burn it onto Fresh SD card to boot from (to be safe, use 16GB or larger), using a tool like win32diskimager or Etcher.
 
Assuming you have keyboard/mouse and monitor plugged into your pi, boot it up and the Jessie Desktop will show.
 
Before we do anything else, you should increase the default swap size on the pi, as compiling certain libraries can exhaust the RAM and get stuck otherwise. To do this, launch a Terminal window and type:
 
sudo nano /etc/dphys-swapfile 
 
and Change the CONF_SWAPSIZE from 100 to:
 
CONF_SWAPSIZE=1024 
 
Exit nano with control + x to write out the file.
 
Then, run the following to restart the swapfile manager:
 
sudo /etc/init.d/dphys-swapfile stop sudo /etc/init.d/dphys-swapfile start 
 
Now, launch the browser and download the Lore 2.12 binaries for ARM here: https://mega.nz/#!k2InxZhb!iaLhUPreA7LZqZ-Az-0StRBUshSJ82XjldPsvhGBBH4 (Version with fee fix from 6 September 2017)
 
(If you prefer to compile it yourself instead, it is possible by following the instructions in the original article by Mindphuk just taking into account this is the newer version of the Lore client than when that was written (https://github.com/janko33bd/bitcoin/releases) and the versions of Boost and the Berkeley DB need to be the same as below.)
 
Double click the zip and extract the Lore binary files. Yes, at the moment they are all called 'bitcoin', not 'blackcoin' or 'Lore' - this is because the code derives from a recent bitcoin core implementation so this has not yet been updated. You can place these wherever you like.
 
In the Terminal window, change directory to where you put the binaries, e.g.:
 
cd Downloads/lore-raspberrypi-armv7-jessie-pixel chmod +x * 
 
That marks the binaries as executable.
 
Now, we need the Boost libraries installed for any of the Lore binaries to work. The project was done with Boost 1.62.0. Unfortunately the Jessie repository only goes up to 1.55, so we need to download and build 1.62 manually on the device.
wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.gz/download tar -xvzf download cd boost_1_62_0 sudo ./bootstrap.sh sudo ./b2 install 
 
(This will take almost 2 hours. Have a nice cup of tea and a sit down.)
 
When I came to run the binaries, I found they couldn't find Boost. Running this command fixes that:
sudo ldconfig 
 
Now we are going to install the packages which aren't already included in the default OS installation which the binaries need in order to run:
sudo apt-get install qrencode libprotobuf-dev libevent-pthreads-2.0-5 
 
Now we need to install the Berkeley Database version 6.2.23. This is the version Lore v2 uses. Bitcoin still uses 4.8 which is 10 years old! This doesn't take too long.
wget http://download.oracle.com/berkeley-db/db-6.2.23.tar.gz tar -xvzf db-6.2.23.tar.gz cd db-6.2.23/build_unix ../dist/configure --prefix=/usr --enable-compat185 --enable-dbm --disable-static --enable-cxx 
 
I find this next section of the Berkeley instructions worked better just switching to root, which can be fudged by running sudo su before the rest:
sudo su make make docdir=/usshare/doc/db-6.2.23 install chown -v -R root:root /usbin/db_* /usinclude/db{,_185,_cxx}.h /uslib/libdb*.{so,la} /usshare/doc/db-6.2.23 
 
Now we're going to go up a couple of directories to where the binaries were:
cd ../.. 
 
Then run the client!
./bitcoin-qt 
 
And there you have it. Should hopefully end up looking a bit like this: http://imgur.com/a/eEHGa
 
Using the Bootstrap can save a while syncing. Download it at: https://www.reddit.com/blackcoin/comments/6b3imq/blackcoin_bootstrapdat_up_to_block_1631800
 
Place the bootstrap.dat file into the ~/.lore directory.
 
Run ./bitcoin-qt again, it will say 'Importing Blocks' rather than 'Synchronising with Network'. My pi sync'ed fully in about 5-6 hours.
 
If you want peace of mind that Lore will always start on bootup into the Jessie w/Pixel desktop (i.e. after a power cycle), then you need to create a .desktop file in the following place.
sudo nano ~/.config/autostart/Lore.desktop 
 
And in it, enter the following (tailoring the Exec line below to the whereabouts of your bitcoin-qt file):
[Desktop Entry] Name=Blackcoin Lore Comment=Mining without the waste Exec=/home/pi/Downloads/lore-raspberrypi-armv7-jessie-pixel/bitcoin-qt Type=Application Encoding=UTF-8 Terminal=false Categories=None; 
 
Power usage and payback time
 
After a good while leaving it going by itself, the CPU load averages got down to almost zero, all of the time. Idling, the Pi uses a bit less than 3 watts. This means it would take two weeks to use one 1Kw/h of electricity.
 
If you pay e.g. 12.5 cents a unit, that's what you'd expect this to cost to run in a fortnight. That's around $0.25 a month or $3 a year. Green and cheap and helping to secure the BLK network. I paid for the year's worth of electricity in 2 days staking with 25k BLK. Makes mining look silly, huh? ;)
 
Securing your Pi
 
With staking, your wallet needs to be unlocked and as such, the keys to your wallet are on the device. In a clean and newly installed environment as described above, and if you don't allow others to use your device and there is no other software or nasties running on it, there is no real cause for concern. However, there are some basic security precautions you can take.
 
Firstly, if you have enabled SSH and are playing with your pi across your LAN (or worse, the Internet), you should immediately change the password for the default 'pi' user (which is preconfigured to be 'raspberry'). Simply log in as normal, then type:
 
passwd 
 
You'll be prompted to enter the old and the new passwords.
 
Security by default
 
Your Pi is likely, by default, to not be exposed to incoming connections from the outside world because your router is likely generating a private address range for your LAN (192.168.x.x or 10.0.x.x or 172.x.x.x) which means all incoming connections are effectively blocked at the router anyway unless you set up a 'port forward' record to allow packets arriving on certain ports to be forwarded to a specific internal IP address.
 
As for accessing your Pi across the internet, if you have set up a port forward, this likely has security ramifications. Even basic old fashioned protocols have proven in recent times to have uncaught flaws, so it's always advisable to lock down your device as much as possible, and even if you only plan to access the Pi over your LAN, install a firewall to configure this. I used one called ufw, because it's literally an uncomplicated firewall.
 
sudo apt-get install ufw sudo ufw allow from 192.168.0.0/16 to any port 22 sudo ufw --force enable 
 
This allows just port 22 (SSH) to be open on the Pi to any device on my LAN's subnet (192.168.0.x). You can change the above to a single IP address if paranoid, or add several lines, if you want to lock it down to your LAN and a specific external static IP address (e.g. a VPN service you use). To find out what subnet your router uses, just type:
 
ifconfig 
 
and you'll see on the interface you are using (either hard wired or wifi) the 192.168 or 10. or 172. prefix. Change the above rule so it matches the first two octets correctly (e.g. 10.0.0.0/16 if you're on a 10.0. address).
 
You may already use VNC to access your Pi's desktop across your LAN, this uses port 5900. Add a line like above to lock it down to an internal address. It's not a good idea to expose this port to the wider world because those connections are not encrypted and potentially could be subjected to a MITM attack.
 
You can query the status of the firewall like this:
ufw status 
 
And of course, try connecting remotely once you change the rules to see what works. You should consult the official documentation for further options: https://help.ubuntu.com/community/UFW
 
Back up & Recovery
 
There are again many ways to tackle this so I'll just speak about my basic precautions in this regard. Don't take it as a be-all-and-end-all!
 
The wallet.dat file is the key file (literally) containing all the private/public keys and transactions. This can be found in:
 
~/.lore 
 
You can navigate there using Jessie w/Pixel's own file manager or in a terminal window (cd ~/.lore). You can copy this file or, if you'd rather keep a plain text file of all your public and private keys, use the 'dumpwallet' command in the console. In Lore, go to Help > Debug Window > Console and type 'dumpwallet myfilename' where myfilename is the file you want it to spit out with all your keys in it. This file will end up in the same place you launch bitcoin-qt from.
 
The instructions earlier on, when running Lore for the first time intentionally left out encrypting your wallet.dat file because in order for the wallet to stake upon startup, it needs to have a decrypted key already. This isn't perfect, but after a power cycle, it would never stake unless you left it decrypted. So the best practice here is as soon as the wallet.dat file has left your device, i.e. you copy it to a USB stick for example, put it in an encrypted folder or drive (or both).
 
In Windows, one way is to use Bitlocker drive encryption for the entire drive. You should follow the instructions here to encrypt your flash drive before your wallet.dat is on there, and don't forget the password!!
http://infosec.nmsu.edu/instructions-guides/how-to-enable-bitlocker-to-go-for-external-hard-drives-and-usb-flash-drives/
 
On the Mac, I use a software package called Concealer to encrypt files I store on the Mac itself: http://www.belightsoft.com/products/conceale   There are almost certainly free packages with similar functionality, I have just used that one for years.
 
Either way, if you want to just make sure your USB drive is encrypted, you can do so in one-click in Finder before you put the sensitive files on it: http://lifehacker.com/encrypt-a-usb-stick-in-finder-with-a-click-1594798016
 
Note that these disk encryption methods may mean having to access the USB stick on a PC or Mac in order to retrieve the files in the event of a disaster. Be aware this may mean exposing them to more security issues if your computer is in any way compromised or someone nefarious has access to your computer. There are more 'manual' ways of backing up and recovering, such as literally writing down private/public key pairs which this guide doesn't go into, but may suit you better if paranoid about your setup.
 
Recovery
 
The wallet.dat file has everything in it you need to recover your wallet, or if you used 'dumpwallet', the file you saved out has all the keys.
 
Wallet.dat method: Install Lore as normal then replace any auto-generated wallet.dat in ~/.lore directory with your backup. If a lot of time has elapsed and many transactions have occurred since your backup, launch lore with:
./bitcoin-qt -rescan 
 
And if that doesn't do the job, do a full reindex of the blockchain:
 
./bitcoin-qt -reindex 
 
If you used the dumpwallet command, install Lore then place the file containing all the keys that you saved out in the same directory as bitcoin-qt. In Lore, go to Help > Debug Window > Console and type 'importwallet myfilename' where myfilename is that file containing all the keys. The wallet should automatically rescan for transactions at that point and you should be good to go.
 
There are a million ways to do effective security and disaster recovery, but I hope this shows you a couple of basic precautionary ways. There are discussions about better ways to stake without compromising too much security which are happening all the time and developments in this regard will happen in time.
 
In the meantime, feel free to comment with your best practices.
 
submitted by patcrypt to blackcoin [link] [comments]

Update: Retrieving coins

Alright here's where I'm at. I have the wallet.dat file, and I have a file labeled multibit.key (which I'm assuming has to do with bitcoin, not doge). I didn't have the Dogecoin-QT app on my computer anymore but I did have a backup of my computer so I restored the app and now have it open but it is not syncing. According to the ELI5 that doesn't matter though. It says in recent transactions I tried to send out all of my doge to my reddit account but since it wasn't synced I don't know if that went through (although balance says 0). I tried using the help-debug-console where you do dumpprivkey "address" and it says that "Private key for address 'address' is not known (code -4)". I forgot to unlock before trying to get the private key. I now have my private key, but when I try to import to MultiDoge it wants a file instead of pasting the private key in. Would anyone know where to go from here? I used dogechain to import private key and it now shows full balance. I think I did it? Yep, I did it. Keeping the post up for future searches, hopefully it helps someone else.
Side question: Since the old dogetipbot is gone I can no longer access history or balance, what happened to the doge I had in that account? Is there a way I can access it?
submitted by JamrJim to dogecoin [link] [comments]

[Guide] How to transfer your wallet from your computer to android.

I got tired of waiting and waiting for the whole blockchain to sync so I decided to move my dogecoins to my phone since the app does not need to download the whole chain. (Luckily there is a bounty for a electrum equivalent that will hopefully arrive soon.)
It is much much easier if you just transfer some funds to a new address on your android phone, but this tutorial is for those people like me who can't even get the dogecoin app to sync.
Surprisingly the whole process was very simple. Don't be put off by all the text or all the talk about security. I just want things to be accessible to beginners and to practice good habits. Root is not required.
Note: I am assuming you are using the official dogecoin-qt app and the Dogecoin Wallet app by langerhans.
Disclaimer: This will involve having your private key stored in plaintext. Proceed with caution and treat that file like you would a password. Do not share your private key with anyone.

Getting your private keys

A wallet comprises of public keys and private keys. Public keys are the addresses that you share, you can only use them for viewing. Private keys let you actually make transfers and are what makes you the owner of the wallet. Today we will be transferring those private keys to your phone. They will still be present on your computer unless you delete them, so keep that in mind security-wise.
You will have to replace everything in '<>' with your own values.
  1. Open the desktop app
  2. Open the wallet console by going to: Help -> Debug Window -> Console
  3. If your wallet is locked with a password, you'll need to unlock it by typing: "walletpassphrase 120".
  4. Get the private key for an address by typing: "dumpprivkey "
  5. Save the private key to a file.
  6. Repeat this for each address that you want to transfer over.
Please think about how much dogecoins you want to transfer over. Brarsh:
Do you need that much? What if you lose your device? Just like only keeping a small amount of cash in your wallet and most safe in the bank, only carry what you could conceivably use for that time without access to your main wallet.

Creating a backup file

Next we need to create a backup file so that we can import our addresses into the android app. The android app uses the same format for its backup files as MultiBit (A popular bitcoin app). A typical file looks like the following:
# KEEP YOUR PRIVATE KEYS SAFE! Anyone who can read this can spend your Bitcoins. Kwmxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2013-06-22T18:36:35Z L1Sxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2013-05-04T22:47:32Z Kxwxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2013-05-08T00:58:28Z 
What we want to do is put our private keys in the following format: key date-of-address-creation, where the date is in the format YYYY-MM-DDTHH:MM:SSZ. Note the T and the Z. The android app needs the date so it knows how far back into the blockchain it needs to sync.
If you can't remember when you created the address, visit http://dogechain.info/address/YOURADDRESS and get the date of the earliest transaction. It says that the dates are approximate, so I'd just put 00:00:00 for the time.
You should now have a valid unencrypted backup of your wallet.

Importing the backup

  1. Transfer the backup to your android phone, placing it in your Download folder. It has to be put in the Download folder or else the dogecoin app won't find the backup. Make sure it has a name you'll remember later.
  2. Open the dogecoin app and click on: Back Up Keys -> Restore private keys. Click on the name of the backup and from the list that shows up, look for your backup, which should be unencrypted. Click Restore.
  3. Delete the backup in your Downloads folder. Remember, your private key is stored in plaintext in there, so it is important that you delete it. Delete the backup on your computer if it is there also.
  4. Wait for the app to sync completely. Your addresses will be added to the addresses that were already in the app, and your transactions should show up. If they do not, make sure that the date you put was correct and early enough.
  5. Go to Back up Keys > Back up private keys and create a backup. This time it will be encrypted with a password :). If you do not have a backup, you could lose all your coins if you lose your phone or the data on it.
  6. To the moon!

Terminology

I just got into dogecoin two days ago so correct me if any of this is wrong. Same thing with anything in the post :).
Blockchain/Dogechain: The blockchain is a ledger (record) of all the dogecoin transactions that have ever taken place. As of writing it is larger than 1GB in size. The blockchain is needed to find out how many funds you have in your wallet.
Wallet: A wallet is the digital equivalent of a real life wallet. It is where your money is tied to (It doesn't contain actual dogecoins, but someone else could explain that better than me). The wallet contains your addresses and your private keys, both which are needed to receive and send dogecoins respectively.

Sources

Getting your private key
Importing the key into the android app
submitted by cooper12 to dogecoin [link] [comments]

Bitcoin Core 0.10.0 released | Wladimir | Feb 16 2015

Wladimir on Feb 16 2015:
Bitcoin Core version 0.10.0 is now available from:
https://bitcoin.org/bin/0.10.0/
This is a new major version release, bringing both new features and
bug fixes.
Please report bugs using the issue tracker at github:
https://github.com/bitcoin/bitcoin/issues
The whole distribution is also available as torrent:
https://bitcoin.org/bin/0.10.0/bitcoin-0.10.0.torrent
magnet:?xt=urn:btih:170c61fe09dafecfbb97cb4dccd32173383f4e68&dn;=0.10.0&tr;=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969&tr;=udp%3A%2F%2Fopen.demonii.com%3A1337&ws;=https%3A%2F%2Fbitcoin.org%2Fbin%2F
Upgrading and downgrading

How to Upgrade
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), then run the
installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or
bitcoind/bitcoin-qt (on Linux).
Downgrading warning
Because release 0.10.0 makes use of headers-first synchronization and parallel
block download (see further), the block files and databases are not
backwards-compatible with older versions of Bitcoin Core or other software:
  • Blocks will be stored on disk out of order (in the order they are
received, really), which makes it incompatible with some tools or
other programs. Reindexing using earlier versions will also not work
anymore as a result of this.
  • The block index database will now hold headers for which no block is
stored on disk, which earlier versions won't support.
If you want to be able to downgrade smoothly, make a backup of your entire data
directory. Without this your node will need start syncing (or importing from
bootstrap.dat) anew afterwards. It is possible that the data from a completely
synchronised 0.10 node may be usable in older versions as-is, but this is not
supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility.
Notable changes

Faster synchronization
Bitcoin Core now uses 'headers-first synchronization'. This means that we first
ask peers for block headers (a total of 27 megabytes, as of December 2014) and
validate those. In a second stage, when the headers have been discovered, we
download the blocks. However, as we already know about the whole chain in
advance, the blocks can be downloaded in parallel from all available peers.
In practice, this means a much faster and more robust synchronization. On
recent hardware with a decent network link, it can be as little as 3 hours
for an initial full synchronization. You may notice a slower progress in the
very first few minutes, when headers are still being fetched and verified, but
it should gain speed afterwards.
A few RPCs were added/updated as a result of this:
  • getblockchaininfo now returns the number of validated headers in addition to
the number of validated blocks.
  • getpeerinfo lists both the number of blocks and headers we know we have in
common with each peer. While synchronizing, the heights of the blocks that we
have requested from peers (but haven't received yet) are also listed as
'inflight'.
  • A new RPC getchaintips lists all known branches of the block chain,
including those we only have headers for.
Transaction fee changes
This release automatically estimates how high a transaction fee (or how
high a priority) transactions require to be confirmed quickly. The default
settings will create transactions that confirm quickly; see the new
'txconfirmtarget' setting to control the tradeoff between fees and
confirmation times. Fees are added by default unless the 'sendfreetransactions'
setting is enabled.
Prior releases used hard-coded fees (and priorities), and would
sometimes create transactions that took a very long time to confirm.
Statistics used to estimate fees and priorities are saved in the
data directory in the fee_estimates.dat file just before
program shutdown, and are read in at startup.
New command line options for transaction fee changes:
  • -txconfirmtarget=n : create transactions that have enough fees (or priority)
so they are likely to begin confirmation within n blocks (default: 1). This setting
is over-ridden by the -paytxfee option.
  • -sendfreetransactions : Send transactions as zero-fee transactions if possible
(default: 0)
New RPC commands for fee estimation:
  • estimatefee nblocks : Returns approximate fee-per-1,000-bytes needed for
a transaction to begin confirmation within nblocks. Returns -1 if not enough
transactions have been observed to compute a good estimate.
  • estimatepriority nblocks : Returns approximate priority needed for
a zero-fee transaction to begin confirmation within nblocks. Returns -1 if not
enough free transactions have been observed to compute a good
estimate.
RPC access control changes
Subnet matching for the purpose of access control is now done
by matching the binary network address, instead of with string wildcard matching.
For the user this means that -rpcallowip takes a subnet specification, which can be
  • a single IP address (e.g. 1.2.3.4 or fe80::0012:3456:789a:bcde)
  • a network/CIDR (e.g. 1.2.3.0/24 or fe80::0000/64)
  • a network/netmask (e.g. 1.2.3.4/255.255.255.0 or fe80::0012:3456:789a:bcde/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff)
An arbitrary number of -rpcallow arguments can be given. An incoming connection will be accepted if its origin address
matches one of them.
For example:
| 0.9.x and before | 0.10.x |
|--------------------------------------------|---------------------------------------|
| -rpcallowip=192.168.1.1 | -rpcallowip=192.168.1.1 (unchanged) |
| -rpcallowip=192.168.1.* | -rpcallowip=192.168.1.0/24 |
| -rpcallowip=192.168.* | -rpcallowip=192.168.0.0/16 |
| -rpcallowip=* (dangerous!) | -rpcallowip=::/0 (still dangerous!) |
Using wildcards will result in the rule being rejected with the following error in debug.log:
 Error: Invalid -rpcallowip subnet specification: *. Valid are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). 
REST interface
A new HTTP API is exposed when running with the -rest flag, which allows
unauthenticated access to public node data.
It is served on the same port as RPC, but does not need a password, and uses
plain HTTP instead of JSON-RPC.
Assuming a local RPC server running on port 8332, it is possible to request:
In every case, EXT can be bin (for raw binary data), hex (for hex-encoded
binary) or json.
For more details, see the doc/REST-interface.md document in the repository.
RPC Server "Warm-Up" Mode
The RPC server is started earlier now, before most of the expensive
intialisations like loading the block index. It is available now almost
immediately after starting the process. However, until all initialisations
are done, it always returns an immediate error with code -28 to all calls.
This new behaviour can be useful for clients to know that a server is already
started and will be available soon (for instance, so that they do not
have to start it themselves).
Improved signing security
For 0.10 the security of signing against unusual attacks has been
improved by making the signatures constant time and deterministic.
This change is a result of switching signing to use libsecp256k1
instead of OpenSSL. Libsecp256k1 is a cryptographic library
optimized for the curve Bitcoin uses which was created by Bitcoin
Core developer Pieter Wuille.
There exist attacks[1] against most ECC implementations where an
attacker on shared virtual machine hardware could extract a private
key if they could cause a target to sign using the same key hundreds
of times. While using shared hosts and reusing keys are inadvisable
for other reasons, it's a better practice to avoid the exposure.
OpenSSL has code in their source repository for derandomization
and reduction in timing leaks that we've eagerly wanted to use for a
long time, but this functionality has still not made its
way into a released version of OpenSSL. Libsecp256k1 achieves
significantly stronger protection: As far as we're aware this is
the only deployed implementation of constant time signing for
the curve Bitcoin uses and we have reason to believe that
libsecp256k1 is better tested and more thoroughly reviewed
than the implementation in OpenSSL.
[1] https://eprint.iacr.org/2014/161.pdf
Watch-only wallet support
The wallet can now track transactions to and from wallets for which you know
all addresses (or scripts), even without the private keys.
This can be used to track payments without needing the private keys online on a
possibly vulnerable system. In addition, it can help for (manual) construction
of multisig transactions where you are only one of the signers.
One new RPC, importaddress, is added which functions similarly to
importprivkey, but instead takes an address or script (in hexadecimal) as
argument. After using it, outputs credited to this address or script are
considered to be received, and transactions consuming these outputs will be
considered to be sent.
The following RPCs have optional support for watch-only:
getbalance, listreceivedbyaddress, listreceivedbyaccount,
listtransactions, listaccounts, listsinceblock, gettransaction. See the
RPC documentation for those methods for more information.
Compared to using getrawtransaction, this mechanism does not require
-txindex, scales better, integrates better with the wallet, and is compatible
with future block chain pruning functionality. It does mean that all relevant
addresses need to added to the wallet before the payment, though.
Consensus library
Starting from 0.10.0, the Bitcoin Core distribution includes a consensus library.
The purpose of this library is to make the verification functionality that is
critical to Bitcoin's consensus available to other applications, e.g. to language
bindings such as [python-bitcoinlib](https://pypi.python.org/pypi/python-bitcoinlib) or
alternative node implementations.
This library is called libbitcoinconsensus.so (or, .dll for Windows).
Its interface is defined in the C header [bitcoinconsensus.h](https://github.com/bitcoin/bitcoin/blob/0.10/src/script/bitcoinconsensus.h).
In its initial version the API includes two functions:
  • bitcoinconsensus_verify_script verifies a script. It returns whether the indicated input of the provided serialized transaction
correctly spends the passed scriptPubKey under additional constraints indicated by flags
  • bitcoinconsensus_version returns the API version, currently at an experimental 0
The functionality is planned to be extended to e.g. UTXO management in upcoming releases, but the interface
for existing methods should remain stable.
Standard script rules relaxed for P2SH addresses
The IsStandard() rules have been almost completely removed for P2SH
redemption scripts, allowing applications to make use of any valid
script type, such as "n-of-m OR y", hash-locked oracle addresses, etc.
While the Bitcoin protocol has always supported these types of script,
actually using them on mainnet has been previously inconvenient as
standard Bitcoin Core nodes wouldn't relay them to miners, nor would
most miners include them in blocks they mined.
bitcoin-tx
It has been observed that many of the RPC functions offered by bitcoind are
"pure functions", and operate independently of the bitcoind wallet. This
included many of the RPC "raw transaction" API functions, such as
createrawtransaction.
bitcoin-tx is a newly introduced command line utility designed to enable easy
manipulation of bitcoin transactions. A summary of its operation may be
obtained via "bitcoin-tx --help" Transactions may be created or signed in a
manner similar to the RPC raw tx API. Transactions may be updated, deleting
inputs or outputs, or appending new inputs and outputs. Custom scripts may be
easily composed using a simple text notation, borrowed from the bitcoin test
suite.
This tool may be used for experimenting with new transaction types, signing
multi-party transactions, and many other uses. Long term, the goal is to
deprecate and remove "pure function" RPC API calls, as those do not require a
server round-trip to execute.
Other utilities "bitcoin-key" and "bitcoin-script" have been proposed, making
key and script operations easily accessible via command line.
Mining and relay policy enhancements
Bitcoin Core's block templates are now for version 3 blocks only, and any mining
software relying on its getblocktemplate must be updated in parallel to use
libblkmaker either version 0.4.2 or any version from 0.5.1 onward.
If you are solo mining, this will affect you the moment you upgrade Bitcoin
Core, which must be done prior to BIP66 achieving its 951/1001 status.
If you are mining with the stratum mining protocol: this does not affect you.
If you are mining with the getblocktemplate protocol to a pool: this will affect
you at the pool operator's discretion, which must be no later than BIP66
achieving its 951/1001 status.
The prioritisetransaction RPC method has been added to enable miners to
manipulate the priority of transactions on an individual basis.
Bitcoin Core now supports BIP 22 long polling, so mining software can be
notified immediately of new templates rather than having to poll periodically.
Support for BIP 23 block proposals is now available in Bitcoin Core's
getblocktemplate method. This enables miners to check the basic validity of
their next block before expending work on it, reducing risks of accidental
hardforks or mining invalid blocks.
Two new options to control mining policy:
  • -datacarrier=0/1 : Relay and mine "data carrier" (OP_RETURN) transactions
if this is 1.
  • -datacarriersize=n : Maximum size, in bytes, we consider acceptable for
"data carrier" outputs.
The relay policy has changed to more properly implement the desired behavior of not
relaying free (or very low fee) transactions unless they have a priority above the
AllowFreeThreshold(), in which case they are relayed subject to the rate limiter.
BIP 66: strict DER encoding for signatures
Bitcoin Core 0.10 implements BIP 66, which introduces block version 3, and a new
consensus rule, which prohibits non-DER signatures. Such transactions have been
non-standard since Bitcoin v0.8.0 (released in February 2013), but were
technically still permitted inside blocks.
This change breaks the dependency on OpenSSL's signature parsing, and is
required if implementations would want to remove all of OpenSSL from the
consensus code.
The same miner-voting mechanism as in BIP 34 is used: when 751 out of a
sequence of 1001 blocks have version number 3 or higher, the new consensus
rule becomes active for those blocks. When 951 out of a sequence of 1001
blocks have version number 3 or higher, it becomes mandatory for all blocks.
Backward compatibility with current mining software is NOT provided, thus miners
should read the first paragraph of "Mining and relay policy enhancements" above.
0.10.0 Change log

Detailed release notes follow. This overview includes changes that affect external
behavior, not code moves, refactors or string updates.
RPC:
  • f923c07 Support IPv6 lookup in bitcoin-cli even when IPv6 only bound on localhost
  • b641c9c Fix addnode "onetry": Connect with OpenNetworkConnection
  • 171ca77 estimatefee / estimatepriority RPC methods
  • b750cf1 Remove cli functionality from bitcoind
  • f6984e8 Add "chain" to getmininginfo, improve help in getblockchaininfo
  • 99ddc6c Add nLocalServices info to RPC getinfo
  • cf0c47b Remove getwork() RPC call
  • 2a72d45 prioritisetransaction
  • e44fea5 Add an option -datacarrier to allow users to disable relaying/mining data carrier transactions
  • 2ec5a3d Prevent easy RPC memory exhaustion attack
  • d4640d7 Added argument to getbalance to include watchonly addresses and fixed errors in balance calculation
  • 83f3543 Added argument to listaccounts to include watchonly addresses
  • 952877e Showing 'involvesWatchonly' property for transactions returned by 'listtransactions' and 'listsinceblock'. It is only appended when the transaction involves a watchonly address
  • d7d5d23 Added argument to listtransactions and listsinceblock to include watchonly addresses
  • f87ba3d added includeWatchonly argument to 'gettransaction' because it affects balance calculation
  • 0fa2f88 added includedWatchonly argument to listreceivedbyaddress/...account
  • 6c37f7f getrawchangeaddress: fail when keypool exhausted and wallet locked
  • ff6a7af getblocktemplate: longpolling support
  • c4a321f Add peerid to getpeerinfo to allow correlation with the logs
  • 1b4568c Add vout to ListTransactions output
  • b33bd7a Implement "getchaintips" RPC command to monitor blockchain forks
  • 733177e Remove size limit in RPC client, keep it in server
  • 6b5b7cb Categorize rpc help overview
  • 6f2c26a Closely track mempool byte total. Add "getmempoolinfo" RPC
  • aa82795 Add detailed network info to getnetworkinfo RPC
  • 01094bd Don't reveal whether password is <20 or >20 characters in RPC
  • 57153d4 rpc: Compute number of confirmations of a block from block height
  • ff36cbe getnetworkinfo: export local node's client sub-version string
  • d14d7de SanitizeString: allow '(' and ')'
  • 31d6390 Fixed setaccount accepting foreign address
  • b5ec5fe update getnetworkinfo help with subversion
  • ad6e601 RPC additions after headers-first
  • 33dfbf5 rpc: Fix leveldb iterator leak, and flush before gettxoutsetinfo
  • 2aa6329 Enable customising node policy for datacarrier data size with a -datacarriersize option
  • f877aaa submitblock: Use a temporary CValidationState to determine accurately the outcome of ProcessBlock
  • e69a587 submitblock: Support for returning specific rejection reasons
  • af82884 Add "warmup mode" for RPC server
  • e2655e0 Add unauthenticated HTTP REST interface to public blockchain data
  • 683dc40 Disable SSLv3 (in favor of TLS) for the RPC client and server
  • 44b4c0d signrawtransaction: validate private key
  • 9765a50 Implement BIP 23 Block Proposal
  • f9de17e Add warning comment to getinfo
Command-line options:
  • ee21912 Use netmasks instead of wildcards for IP address matching
  • deb3572 Add -rpcbind option to allow binding RPC port on a specific interface
  • 96b733e Add -version option to get just the version
  • 1569353 Add -stopafterblockimport option
  • 77cbd46 Let -zapwallettxes recover transaction meta data
  • 1c750db remove -tor compatibility code (only allow -onion)
  • 4aaa017 rework help messages for fee-related options
  • 4278b1d Clarify error message when invalid -rpcallowip
  • 6b407e4 -datadir is now allowed in config files
  • bdd5b58 Add option -sysperms to disable 077 umask (create new files with system default umask)
  • cbe39a3 Add "bitcoin-tx" command line utility and supporting modules
  • dbca89b Trigger -alertnotify if network is upgrading without you
  • ad96e7c Make -reindex cope with out-of-order blocks
  • 16d5194 Skip reindexed blocks individually
  • ec01243 --tracerpc option for regression tests
  • f654f00 Change -genproclimit default to 1
  • 3c77714 Make -proxy set all network types, avoiding a connect leak
  • 57be955 Remove -printblock, -printblocktree, and -printblockindex
  • ad3d208 remove -maxorphanblocks config parameter since it is no longer functional
Block and transaction handling:
  • 7a0e84d ProcessGetData(): abort if a block file is missing from disk
  • 8c93bf4 LoadBlockIndexDB(): Require block db reindex if any blk*.dat files are missing
  • 77339e5 Get rid of the static chainMostWork (optimization)
  • 4e0eed8 Allow ActivateBestChain to release its lock on cs_main
  • 18e7216 Push cs_mains down in ProcessBlock
  • fa126ef Avoid undefined behavior using CFlatData in CScript serialization
  • 7f3b4e9 Relax IsStandard rules for pay-to-script-hash transactions
  • c9a0918 Add a skiplist to the CBlockIndex structure
  • bc42503 Use unordered_map for CCoinsViewCache with salted hash (optimization)
  • d4d3fbd Do not flush the cache after every block outside of IBD (optimization)
  • ad08d0b Bugfix: make CCoinsViewMemPool support pruned entries in underlying cache
  • 5734d4d Only remove actualy failed blocks from setBlockIndexValid
  • d70bc52 Rework block processing benchmark code
  • 714a3e6 Only keep setBlockIndexValid entries that are possible improvements
  • ea100c7 Reduce maximum coinscache size during verification (reduce memory usage)
  • 4fad8e6 Reject transactions with excessive numbers of sigops
  • b0875eb Allow BatchWrite to destroy its input, reducing copying (optimization)
  • 92bb6f2 Bypass reloading blocks from disk (optimization)
  • 2e28031 Perform CVerifyDB on pcoinsdbview instead of pcoinsTip (reduce memory usage)
  • ab15b2e Avoid copying undo data (optimization)
  • 341735e Headers-first synchronization
  • afc32c5 Fix rebuild-chainstate feature and improve its performance
  • e11b2ce Fix large reorgs
  • ed6d1a2 Keep information about all block files in memory
  • a48f2d6 Abstract context-dependent block checking from acceptance
  • 7e615f5 Fixed mempool sync after sending a transaction
  • 51ce901 Improve chainstate/blockindex disk writing policy
  • a206950 Introduce separate flushing modes
  • 9ec75c5 Add a locking mechanism to IsInitialBlockDownload to ensure it never goes from false to true
  • 868d041 Remove coinbase-dependant transactions during reorg
  • 723d12c Remove txn which are invalidated by coinbase maturity during reorg
  • 0cb8763 Check against MANDATORY flags prior to accepting to mempool
  • 8446262 Reject headers that build on an invalid parent
  • 008138c Bugfix: only track UTXO modification after lookup
P2P protocol and network code:
  • f80cffa Do not trigger a DoS ban if SCRIPT_VERIFY_NULLDUMMY fails
  • c30329a Add testnet DNS seed of Alex Kotenko
  • 45a4baf Add testnet DNS seed of Andreas Schildbach
  • f1920e8 Ping automatically every 2 minutes (unconditionally)
  • 806fd19 Allocate receive buffers in on the fly
  • 6ecf3ed Display unknown commands received
  • aa81564 Track peers' available blocks
  • caf6150 Use async name resolving to improve net thread responsiveness
  • 9f4da19 Use pong receive time rather than processing time
  • 0127a9b remove SOCKS4 support from core and GUI, use SOCKS5
  • 40f5cb8 Send rejects and apply DoS scoring for errors in direct block validation
  • dc942e6 Introduce whitelisted peers
  • c994d2e prevent SOCKET leak in BindListenPort()
  • a60120e Add built-in seeds for .onion
  • 60dc8e4 Allow -onlynet=onion to be used
  • 3a56de7 addrman: Do not propagate obviously poor addresses onto the network
  • 6050ab6 netbase: Make SOCKS5 negotiation interruptible
  • 604ee2a Remove tx from AlreadyAskedFor list once we receive it, not when we process it
  • efad808 Avoid reject message feedback loops
  • 71697f9 Separate protocol versioning from clientversion
  • 20a5f61 Don't relay alerts to peers before version negotiation
  • b4ee0bd Introduce preferred download peers
  • 845c86d Do not use third party services for IP detection
  • 12a49ca Limit the number of new addressses to accumulate
  • 35e408f Regard connection failures as attempt for addrman
  • a3a7317 Introduce 10 minute block download timeout
  • 3022e7d Require sufficent priority for relay of free transactions
  • 58fda4d Update seed IPs, based on bitcoin.sipa.be crawler data
  • 18021d0 Remove bitnodes.io from dnsseeds.
Validation:
  • 6fd7ef2 Also switch the (unused) verification code to low-s instead of even-s
  • 584a358 Do merkle root and txid duplicates check simultaneously
  • 217a5c9 When transaction outputs exceed inputs, show the offending amounts so as to aid debugging
  • f74fc9b Print input index when signature validation fails, to aid debugging
  • 6fd59ee script.h: set_vch() should shift a >32 bit value
  • d752ba8 Add SCRIPT_VERIFY_SIGPUSHONLY (BIP62 rule 2) (test only)
  • 698c6ab Add SCRIPT_VERIFY_MINIMALDATA (BIP62 rules 3 and 4) (test only)
  • ab9edbd script: create sane error return codes for script validation and remove logging
  • 219a147 script: check ScriptError values in script tests
  • 0391423 Discourage NOPs reserved for soft-fork upgrades
  • 98b135f Make STRICTENC invalid pubkeys fail the script rather than the opcode
  • 307f7d4 Report script evaluation failures in log and reject messages
  • ace39db consensus: guard against openssl's new strict DER checks
  • 12b7c44 Improve robustness of DER recoding code
  • 76ce5c8 fail immediately on an empty signature
Build system:
  • f25e3ad Fix build in OS X 10.9
  • 65e8ba4 build: Switch to non-recursive make
  • 460b32d build: fix broken boost chrono check on some platforms
  • 9ce0774 build: Fix windows configure when using --with-qt-libdir
  • ea96475 build: Add mention of --disable-wallet to bdb48 error messages
  • 1dec09b depends: add shared dependency builder
  • c101c76 build: Add --with-utils (bitcoin-cli and bitcoin-tx, default=yes). Help string consistency tweaks. Target sanity check fix
  • e432a5f build: add option for reducing exports (v2)
  • 6134b43 Fixing condition 'sabotaging' MSVC build
  • af0bd5e osx: fix signing to make Gatekeeper happy (again)
  • a7d1f03 build: fix dynamic boost check when --with-boost= is used
  • d5fd094 build: fix qt test build when libprotobuf is in a non-standard path
  • 2cf5f16 Add libbitcoinconsensus library
  • 914868a build: add a deterministic dmg signer
  • 2d375fe depends: bump openssl to 1.0.1k
  • b7a4ecc Build: Only check for boost when building code that requires it
Wallet:
  • b33d1f5 Use fee/priority estimates in wallet CreateTransaction
  • 4b7b1bb Sanity checks for estimates
  • c898846 Add support for watch-only addresses
  • d5087d1 Use script matching rather than destination matching for watch-only
  • d88af56 Fee fixes
  • a35b55b Dont run full check every time we decrypt wallet
  • 3a7c348 Fix make_change to not create half-satoshis
  • f606bb9 fix a possible memory leak in CWalletDB::Recover
  • 870da77 fix possible memory leaks in CWallet::EncryptWallet
  • ccca27a Watch-only fixes
  • 9b1627d [Wallet] Reduce minTxFee for transaction creation to 1000 satoshis
  • a53fd41 Deterministic signing
  • 15ad0b5 Apply AreSane() checks to the fees from the network
  • 11855c1 Enforce minRelayTxFee on wallet created tx and add a maxtxfee option
GUI:
  • c21c74b osx: Fix missing dock menu with qt5
  • b90711c Fix Transaction details shows wrong To:
  • 516053c Make links in 'About Bitcoin Core' clickable
  • bdc83e8 Ensure payment request network matches client network
  • 65f78a1 Add GUI view of peer information
  • 06a91d9 VerifyDB progress reporting
  • fe6bff2 Add BerkeleyDB version info to RPCConsole
  • b917555 PeerTableModel: Fix potential deadlock. #4296
  • dff0e3b Improve rpc console history behavior
  • 95a9383 Remove CENT-fee-rule from coin control completely
  • 56b07d2 Allow setting listen via GUI
  • d95ba75 Log messages with type>QtDebugMsg as non-debug
  • 8969828 New status bar Unit Display Control and related changes
  • 674c070 seed OpenSSL PNRG with Windows event data
  • 509f926 Payment request parsing on startup now only changes network if a valid network name is specified
  • acd432b Prevent balloon-spam after rescan
  • 7007402 Implement SI-style (thin space) thoudands separator
  • 91cce17 Use fixed-point arithmetic in amount spinbox
  • bdba2dd Remove an obscure option no-one cares about
  • bd0aa10 Replace the temporary file hack currently used to change Bitcoin-Qt's dock icon (OS X) with a buffer-based solution
  • 94e1b9e Re-work overviewpage UI
  • 8bfdc9a Better looking trayicon
  • b197bf3 disable tray interactions when client model set to 0
  • 1c5f0af Add column Watch-only to transactions list
  • 21f139b Fix tablet crash. closes #4854
  • e84843c Broken addresses on command line no longer trigger testnet
  • a49f11d Change splash screen to normal window
  • 1f9be98 Disable App Nap on OSX 10.9+
  • 27c3e91 Add proxy to options overridden if necessary
  • 4bd1185 Allow "emergency" shutdown during startup
  • d52f072 Don't show wallet options in the preferences menu when running with -disablewallet
  • 6093aa1 Qt: QProgressBar CPU-Issue workaround
  • 0ed9675 [Wallet] Add global boolean whether to send free transactions (default=true)
  • ed3e5e4 [Wallet] Add global boolean whether to pay at least the custom fee (default=true)
  • e7876b2 [Wallet] Prevent user from paying a non-sense fee
  • c1c9d5b Add Smartfee to GUI
  • e0a25c5 Make askpassphrase dialog behave more sanely
  • 94b362d On close of splashscreen interrupt verifyDB
  • b790d13 English translation update
  • 8543b0d Correct tooltip on address book page
Tests:
  • b41e594 Fix script test handling of empty scripts
  • d3a33fc Test CHECKMULTISIG with m == 0 and n == 0
  • 29c1749 Let tx (in)valid tests use any SCRIPT_VERIFY flag
  • 6380180 Add rejection of non-null CHECKMULTISIG dummy values
  • 21bf3d2 Add tests for BoostAsioToCNetAddr
  • b5ad5e7 Add Python test for -rpcbind and -rpcallowip
  • 9ec0306 Add CODESEPARATOFindAndDelete() tests
  • 75ebced Added many rpc wallet tests
  • 0193fb8 Allow multiple regression tests to run at once
  • 92a6220 Hook up sanity checks
  • 3820e01 Extend and move all crypto tests to crypto_tests.cpp
  • 3f9a019 added list/get received by address/ account tests
  • a90689f Remove timing-based signature cache unit test
  • 236982c Add skiplist unit tests
  • f4b00be Add CChain::GetLocator() unit test
  • b45a6e8 Add test for getblocktemplate longpolling
  • cdf305e Set -discover=0 in regtest framework
  • ed02282 additional test for OP_SIZE in script_valid.json
  • 0072d98 script tests: BOOLAND, BOOLOR decode to integer
  • 833ff16 script tests: values that overflow to 0 are true
  • 4cac5db script tests: value with trailing 0x00 is true
  • 89101c6 script test: test case for 5-byte bools
  • d2d9dc0 script tests: add tests for CHECKMULTISIG limits
  • d789386 Add "it works" test for bitcoin-tx
  • df4d61e Add bitcoin-tx tests
  • aa41ac2 Test IsPushOnly() with invalid push
  • 6022b5d Make script_{valid,invalid}.json validation flags configurable
  • 8138cbe Add automatic script test generation, and actual checksig tests
  • ed27e53 Add coins_tests with a large randomized CCoinViewCache test
  • 9df9cf5 Make SCRIPT_VERIFY_STRICTENC compatible with BIP62
  • dcb9846 Extend getchaintips RPC test
  • 554147a Ensure MINIMALDATA invalid tests can only fail one way
  • dfeec18 Test every numeric-accepting opcode for correct handling of the numeric minimal encoding rule
  • 2b62e17 Clearly separate PUSHDATA and numeric argument MINIMALDATA tests
  • 16d78bd Add valid invert of invalid every numeric opcode tests
  • f635269 tests: enable alertnotify test for Windows
  • 7a41614 tests: allow rpc-tests to get filenames for bitcoind and bitcoin-cli from the environment
  • 5122ea7 tests: fix forknotify.py on windows
  • fa7f8cd tests: remove old pull-tester scripts
  • 7667850 tests: replace the old (unused since Travis) tests with new rpc test scripts
  • f4e0aef Do signature-s negation inside the tests
  • 1837987 Optimize -regtest setgenerate block generation
  • 2db4c8a Fix node ranges in the test framework
  • a8b2ce5 regression test only setmocktime RPC call
  • daf03e7 RPC tests: create initial chain with specific timestamps
  • 8656dbb Port/fix txnmall.sh regression test
  • ca81587 Test the exact order of CHECKMULTISIG sig/pubkey evaluation
  • 7357893 Prioritize and display -testsafemode status in UI
  • f321d6b Add key generation/verification to ECC sanity check
  • 132ea9b miner_tests: Disable checkpoints so they don't fail the subsidy-change test
  • bc6cb41 QA RPC tests: Add tests block block proposals
  • f67a9ce Use deterministically generated script tests
  • 11d7a7d [RPC] add rpc-test for http keep-alive (persistent connections)
  • 34318d7 RPC-test based on invalidateblock for mempool coinbase spends
  • 76ec867 Use actually valid transactions for script tests
  • c8589bf Add actual signature tests
  • e2677d7 Fix smartfees test for change to relay policy
  • 263b65e tests: run sanity checks in tests too
Miscellaneous:
  • 122549f Fix incorrect checkpoint data for testnet3
  • 5bd02cf Log used config file to debug.log on startup
  • 68ba85f Updated Debian example bitcoin.conf with config from wiki + removed some cruft and updated comments
  • e5ee8f0 Remove -beta suffix
  • 38405ac Add comment regarding experimental-use service bits
  • be873f6 Issue warning if collecting RandSeed data failed
  • 8ae973c Allocate more space if necessary in RandSeedAddPerfMon
  • 675bcd5 Correct comment for 15-of-15 p2sh script size
  • fda3fed libsecp256k1 integration
  • 2e36866 Show nodeid instead of addresses in log (for anonymity) unless otherwise requested
  • cd01a5e Enable paranoid corruption checks in LevelDB >= 1.16
  • 9365937 Add comment about never updating nTimeOffset past 199 samples
  • 403c1bf contrib: remove getwork-based pyminer (as getwork API call has been removed)
  • 0c3e101 contrib: Added systemd .service file in order to help distributions integrate bitcoind
  • 0a0878d doc: Add new DNSseed policy
  • 2887bff Update coding style and add .clang-format
  • 5cbda4f Changed LevelDB cursors to use scoped pointers to ensure destruction when going out of scope
  • b4a72a7 contrib/linearize: split output files based on new-timestamp-year or max-file-size
  • e982b57 Use explicit fflush() instead of setvbuf()
  • 234bfbf contrib: Add init scripts and docs for Upstart and OpenRC
  • 01c2807 Add warning about the merkle-tree algorithm duplicate txid flaw
  • d6712db Also create pid file in non-daemon mode
  • 772ab0e contrib: use batched JSON-RPC in linarize-hashes (optimization)
  • 7ab4358 Update bash-completion for v0.10
  • 6e6a36c contrib: show pull # in prompt for github-merge script
  • 5b9f842 Upgrade leveldb to 1.18, make chainstate databases compatible between ARM and x86 (issue #2293)
  • 4e7c219 Catch UTXO set read errors and shutdown
  • 867c600 Catch LevelDB errors during flush
  • 06ca065 Fix CScriptID(const CScript& in) in empty script case
Credits

Thanks to everyone who contributed to this release:
  • 21E14
  • Adam Weiss
  • Aitor Pazos
  • Alexander Jeng
  • Alex Morcos
  • Alon Muroch
  • Andreas Schildbach
  • Andrew Poelstra
  • Andy Alness
  • Ashley Holman
  • Benedict Chan
  • Ben Holden-Crowther
  • Bryan Bishop
  • BtcDrak
  • Christian von Roques
  • Clinton Christian
  • Cory Fields
  • Cozz Lovan
  • daniel
  • Daniel Kraft
  • David Hill
  • Derek701
  • dexX7
  • dllud
  • Dominyk Tiller
  • Doug
  • elichai
  • elkingtowa
  • ENikS
  • Eric Shaw
  • Federico Bond
  • Francis GASCHET
  • Gavin Andresen
  • Giuseppe Mazzotta
  • Glenn Willen
  • Gregory Maxwell
  • gubatron
  • HarryWu
  • himynameismartin
  • Huang Le
  • Ian Carroll
  • imharrywu
  • Jameson Lopp
  • Janusz Lenar
  • JaSK
  • Jeff Garzik
  • JL2035
  • Johnathan Corgan
  • Jonas Schnelli
  • jtimon
  • Julian Haight
  • Kamil Domanski
  • kazcw
  • kevin
  • kiwigb
  • Kosta Zertsekel
  • LongShao007
  • Luke Dashjr
  • Mark Friedenbach
  • Mathy Vanvoorden
  • Matt Corallo
  • Matthew Bogosian
  • Micha
  • Michael Ford
  • Mike Hearn
  • mrbandrews
  • mruddy
  • ntrgn
  • Otto Allmendinger
  • paveljanik
  • Pavel Vasin
  • Peter Todd
  • phantomcircuit
  • Philip Kaufmann
  • Pieter Wuille
  • pryds
  • randy-waterhouse
  • R E Broadley
  • Rose Toomey
  • Ross Nicoll
  • Roy Badami
  • Ruben Dario Ponticelli
  • Rune K. Svendsen
  • Ryan X. Charles
  • Saivann
  • sandakersmann
  • SergioDemianLerner
  • shshshsh
  • sinetek
  • Stuart Cardall
  • Suhas Daftuar
  • Tawanda Kembo
  • Teran McKinney
  • tm314159
  • Tom Harding
  • Trevin Hofmann
  • Whit J
  • Wladimir J. van der Laan
  • Yoichi Hirai
  • Zak Wilcox
As well as everyone that helped translating on [Transifex](https://www.transifex.com/projects/p/bitcoin/).
Also lots of thanks to the bitcoin.org website team David A. Harding and Saivann Carignan.
Wladimir
original: http://lists.linuxfoundation.org/pipermail/bitcoin-dev/2015-February/007480.html
submitted by bitcoin-devlist-bot to bitcoin_devlist [link] [comments]

PACcoin Watch Me Open My Out of Sync Wallet + Updates Coinbase Coinmarket Cap How to Recover Missing Bitcoins / Not Showing Up While ... Beyond console.log(): A Step Into Debugging PAC Coin Wallet Transfer From Cryptopia Encrypt Debug Unlock How to solo mining with your Bitcoin wallet - CPU mining

Rather than doing a circle and re-resolving the node's IP, just use the one from nodestats directly. This requires syncing the addr field from CNode. Fixes #8876 Wallet not syncing – Troubleshooting an out of sync QT wallet. So why your wallet won’t sync? Here are some common reasons: Broadband and Firewall issues; No active connection to the coin network ; Your blockchain data might be corrupt and; Your wallet could be old and might be on the wrong chain. Now before you make any changes the first thing we recommend you to do is take a wallet ... Adresses #8060 and #7235 This change will slide in a semi transparent modal info layer in out-of-sync state resulting in a more prominent warning. Users can hide the modal info layer by pressing on "Hide". Clicking on the out-of-sync warning icons will re-display the modal info layer. In the modal info layer, the user can get three new values: amount of blocks left estimated time left until in ... When Bitcoin Core is out-of-sync on startup, a semi-transparent information layer will be shown over top of the normal display. This layer contains details about the current sync progress and estimates the amount of time remaining to finish syncing. This layer can also be hidden and subsequently unhidden by clicking on the progress bar at the bottom of the window. If your wallet is not syncing and in your debug.log file, you see all "connection refused" logs, if means that your OS, firewall or network is blocking connections to other nodes in the network. You can find your debug log file by clicking - Help - Debug Console - Debug Log File Open. To confirm this you can use the following commands in your OS:

[index] [19217] [29148] [33892] [41062] [17790] [14041] [29763] [30953] [15606] [34262]

PACcoin Watch Me Open My Out of Sync Wallet + Updates Coinbase Coinmarket Cap

How to solo mining bitcoin with your Bitcoin wallet CPU mining on PC Run your wallet - Help - Debug Window - Console for start mining writte: setgenerate true -1 for controle mining: getmininginfo ... How to Move Bitcoin from your Coinbase Account to the Electrum Bitcoin ... Litecoin-QT wallet Private Key access tutorial. Client dumpprivkey walletpassphrase - Duration: 4:46. Dash Infonode ... This guide will show you how to recover your lost or missing bitcoins from the bitcoin core wallet while it's still syncing. My Book: https://www.amazon.com/... Answers to FAQ (minus the questions): It may take up to 24 hours for your wallet to complete the download AND SYNC process. You have to have your coins in yo... How to Repair a Qt Wallet that won't Sync. - Duration: 7:21. ... PRO Wallet Out Of Sync - Another Solution To Fix - Duration: 9:31. Cryptocurrency Group 4,764 views. 9:31. Pomp Podcast #251: Mark ...

#