Bitcoin Core version 0.19.0.1 released

A Guide to Keeping Keys Offline Using Armory +rPi

Hi Redditors.
I am going to post in this thread my experiences in getting my Desktop (Debian) machine running Armory in watch-only mode, and coupling that with an offline Raspberry Pi (which holds my private keys) for signing the transactions previously made in watch-only mode.
I actually compiled Armory from source directly on my Pi. This guide is probably more for the bitcoin 'power user', as to run Armory online, and broadcast the signed transactions, you need to have a bitcoin full node running (bitcoind).
Basic requirements:
Aimed-for Setup:
I'll post the guide in digestible sections...

Section 1

I should begin by saying I installed source code from git, and got Armory to build the DB on my desktop initially, WITHOUT creating a wallet.. (This allowed me to debug what was going on a little!)
Go to Bitcoin.org, select Armory..
It leads to a Download from Git:
https://github.com/goatpig/BitcoinArmory/releases
Followed the procedure for Linux Debian verify code, compile, install, all straight-forward..
Began by running bitcoind, and telling Armory where to find it. This is the command I used, obviously it was all on one line and didn't include the arrows/explanations!:
python ArmoryQt.py \ --satoshi-datadir=/BlockChain/chain20180414/blocks \ # <-----(where my bitcoind blocks live) --datadir=/ArmoryDataDi \ # <-----(this is instead of ~/.armory) --dbdir=/ArmoryDataDidatabases # <-------(again, non std. place used for Armory's databases.. my choice.) 
So, on the Desktop, after the initial "build databases"
(NB the initial "Build Databases" took about 1.5h and my two CPUs were maxed the whole time, Temps up to 62C. Not ideal; Im not in a rush!)
I then wanted to import a watch-only wallet.
Before I did this, I took a full backup of the Armory data dir:
/ArmoryDataDi
(or ~/.armory in a default installation).
I'd hate to have to make Armory do another full sync with the bitcoind node!

Section 2

Next step: offline wallet (with Private Keys) is on a Raspberry Pi.
I downloaded the source and managed to compile it on the pi itself! :)
Though there were some gymnastics needed to setup the Pi.
My Pi is running Raspbian based on Wheezy.. quite old!
I did the following on the Pi:
apt-get update apt-get upgrade (<---took about an hour!) apt-get install autotools-dev apt-get install autoconf 
Then I followed the instructions exactly as I had done for my Debian Desktop machine, EXCEPT:
I had to increase the Pi's swap space. I upped it from 100Mb to 400Mb.
The compilation took 7 hours, and my poor SD card got a thrashing.
But after compilation, I put the Swap back to 100Mb and Armory runs ok with about 150Mb of memory (no swap needed).
Swap increase on the Pi:
use your favourite editor, and open the file /etc/dphys-swapfile
add/change the following line:
CONF_SWAPSIZE=400 
Then, REBOOT the Pi:
sudo shutdown -h -P now 
Once the compilation was done on the Pi, put the swap back, rebooted and created an Armory wallet.
I added manual entropy and upped the encryption 'time' from 250ms to 2500ms - since the Pi is slow, but I'll be happy to wait for more iterations in the Key Derivation Function.
Once the wallet was created, it obviously prompts you for backup.
I want to add a private key of my own (i.e. import), so don't do the backup until this is over.
I import my Private Key, and Armory checks that this corresponds to a Public Key, which I check is correct.
This is the point now where the Pi storage medium (e.g an SD card) has to be properly destroyed if you ever get rid of it.
I had thought that now would be a good time to decide if your new wallet will generate Segwit receiving addresses, and also addresses used to receive 'change' after a transaction..
But it seems Armory WON'T let you switch to P2SH-P2WPKH unless your Armory is connected to a node offering "WITNESS" service.
Obviously, my Pi is offline and will never connect to a node, so the following will not work on the Pi:
NB: I thought about setting this on the Debian "watch-only" wallet, but that would surely mean doom, as the Pi would not know about those addresses and backups might not keep them.. who knows...
So, end result:- no segwit for me just yet in my offline funds.

--If anyone can offer a solution to this, I'd be very grateful--

Section 3

Ok, now this is a good point to back up your wallet on the Pi. It has your imported keys. I choose a Digital Backup - and put it on a USB key, which will never touch the internet and will be stored off-site. I also chose to encrypt it, because I'm good with passwords..
NB: The Armory paper backup will NOT back up your imported private keys, so keep those somewhere if you're not sweeping them. It would be prudent to have an Armory paper backup anyway, but remember it will likely NOT help you with that imported key.
Now for the watch-only copy of the wallet. I want to get the "watch-only" version onto my Desktop Debian machine.
On the Pi, I created (exported to a USB key) a "watching-only" copy of my wallet.
I would use the RECOMMENDED approach, export the "Entire Wallet File".
As you will see below, I initially exported only the ROOT data, which will NOT capture the watching-only part of the Private Key I entered manually above (i.e. the public Key!).
Now, back on the Debian Desktop machine...
I stopped all my crontab jobs; just give Armory uninterrupted CPU/memory/disk...
I also stopped bitcoind and made a backup prior to any watch-only wallet being imported.
I already made a backup of Armory on my Desktop, before any wallet import.
(this was needed, as I made a mistake.. see below)
So on the Debian Desktop machine, I begin by firing up bitcoind.
my command for this is:
./bitcoind -daemon -datadir=/BlockChain/chain20180414 -dbcache=400 -maxmempool=400 

Section 4

I try running Armory like this:
(I'm actually starting Armory from a script - StartArm.sh)
Inside the script StartArm.sh, it has the line:
python ArmoryQt.py --ram-usage=4 --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
I know from bitter experience that doing a scan over the blockchain for a new wallet takes a looong time and a lot of CPU, and I'd like it to play nicely; not gobble all the memory and swap and run my 2xCPUs both at 100% for four hours...
So... I aim to run with --ram-usage=X and --thread-count=X
(For me in the end, X=1 but I began with X=4)
I began with --ram-usage=4 (<--- = 4x128Mb)
The result is below...
TypeError: cannot concatenate 'str' and 'int' objects 
It didn't recognise the ram-usage and carried on, crippling my Debian desktop PC.
This is where it gets dangerous; Armory can gobble so much memory and CPU that the windowing environment can cease up, and it can take over 30 minutes just to exit nicely from bitcoind and ArmoryDB.
So, I ssh to the machine from another computer, and keep an eye on it with the command
"free -h" 
I'd also be able to do a "sudo reboot now" if needed from here.

Section 5

So, trying to get my --ram-usage command recognised, I tried this line (added quotes):
python ArmoryQt.py --ram-usage="4" --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
But no, same error...
Loading Armory Engine: Armory Version: 0.96.4 Armory Build: None PyBtcWallet Version: 1.35 Detected Operating system: Linux OS Variant : ('debian', '9.4', '') User home-directory : /home/ Satoshi BTC directory : /BlockChain/chain20180414 Armory home dir : /ArmoryDataDi ArmoryDB directory : /ArmoryDataDidatabases Armory settings file : /ArmoryDataDiArmorySettings.txt Armory log file : /ArmoryDataDiarmorylog.txt Do wallet checking : True (ERROR) ArmoryUtils.py:3723 - Unsupported language specified. Defaulting to English (en) (ERROR) ArmoryQt.py:1833 - Failed to start Armory database: cannot concatenate 'str' and 'int' objects Traceback (most recent call last): File "ArmoryQt.py", line 1808, in startArmoryDBIfNecessary TheSDM.spawnDB(str(ARMORY_HOME_DIR), TheBDM.armoryDBDir) File "/BitcoinArmory/SDM.py", line 387, in spawnDB pargs.append('--ram-usage=' + ARMORY_RAM_USAGE) TypeError: cannot concatenate 'str' and 'int' objects 

Section 6

So, I edit the Armory python file SDM.py:
if ARMORY_RAM_USAGE != -1: pargs.append('--ram-usage=4') #COMMENTED THIS, SO I CAN HARDCODE =4 # ' + ARMORY_RAM_USAGE) 
Running it, I now have acknowledgement of the --ram-usage=4:
(WARNING) SDM.py:400 - Spawning DB with command: /BitcoinArmory/ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/BlockChain/chain20180414/blocks" --datadir="/ArmoryDataDi" --dbdir="/ArmoryDataDidatabases" --ram-usage=4 
Also, even with ram-usage=4, it used too much memory, so I told it to quit.
It took over 30 minutes to stop semi-nicely. The last thing it reported was:
ERROR - 00:25:21: (StringSockets.cpp:351) FcgiSocket::writeAndRead FcgiError: unexpected fcgi header version 
But that didn't seem to matter or corrupt the Armory Database, so I think it's ok.
So, I get brave and change SDM.py as below, and I make sure my script has a command line for --ram-usage="ABCDE" and --thread-count="FGHIJ"; the logic being that these strings "ABCDE" will pass the IF criteria below, and my hardcoded values will be used...
if ARMORY_RAM_USAGE != -1: pargs.append('--ram-usage=1') #COMMENTED THIS, SO I CAN HARDCODE =1 # ' + ARMORY_RAM_USAGE) if ARMORY_THREAD_COUNT != -1 pargs.append('--thread-count=1') #COMMENTED THIS, SO I CAN HARDCODE =1 #' + ARMORY_THREAD_COUNT) 
So, as usual, I use my script and start this with: ./StartArm.sh
(which uses command line:)
python ArmoryQt.py --ram-usage="ABCDE" --thread-count="FGHIJ" --satoshi-datadir=/BlockChain/chain20180414/blocks --datadir=/ArmoryDataDi --dbdir=/ArmoryDataDidatabases 
(this forces it to use my hard-coded values in SDM.py...)
So, this is the command which it reports that it starts with:
(WARNING) SDM.py:400 - Spawning DB with command: /BitcoinArmory/ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/BlockChain/chain20180414/blocks" --datadir="/ArmoryDataDi" --dbdir="/ArmoryDataDidatabases" --ram-usage=1 --thread-count=1 
Again, this is where it gets dangerous; Armory can gobble so much memory and CPU that the windowing environment can cease up. So I ssh to the machine and keep an eye on it with:
"free -h" 

Section 7

So, on the Debian Desktop PC, I inserted the USB stick with the watch-only wallet I exported from the Pi.
Start Armory...
Import "Entire Wallet File" watch-only copy.
Wait 4 hours..
YAY!!!
After running Armory for about 30m, the memory usage dropped by 400m... wierd...
It took ~2 hours to get 40% completion.
After 3.5 hours it's almost there...
The memory went up to about 1.7Gb in use and 900Mb of Swap, but the machine remained fairly responsive throughout, apart from a few (10?) periods at the start, where it appeared to freeze for 10-30s at a time.
(That's where my ssh session came in handy - I could check the machine was still ok with a "free -h" command)
Now, I can:
Create an unsigned transaction on my Desktop,
Save the tx to USB stick,
Move to the Pi,
Sign the tx,
Move back to the Desktop,
Broadcast the signed tx.

Section 8

My initial Mistake:
This caused me to have to roll-back my Armory database, using the backup. so you should try to avoid doing this..
On the Pi, I exported only the ROOT data, which will NOT capture the watching-only part of the Private Key
It is RECOMMENDED to use the Digital Export of Entire Wallet File from the Pi when making a watch-only copy. If you just export just the "ROOT data", not the "Entire Wallet File", you'll have problems if you used an imported Private Key in the offline wallet, like I did.
Using the ROOT data text import, after it finished... my balance was zero. So,. I tried a Help->Rescan Balance (Restart Armory, takes 1minute to get back up and running) No Luck. Still zero balance.
So, I try Rescan Databases.. This will take longer. Nah.. no luck.
So, I tried again, thinking it might be to do with the fact that I imported the text "root data" stuff, instead of following the (Recommended) export of watching-wallet file.
So, I used my Armory backup, and wound back the ArmoryDataDi to the point before the install of the (zero balance) wallet. (you should not need to do this, as you will hopefully use the RECOMMENDED approach of exporting the "Entire Wallet File"!)
submitted by fartinator to Bitcoin [link] [comments]

Ravencoin Open Developer Meeting - 1/4/2019

[14:04] Hi everyone! [14:04] :dabbitwave: [14:04] Hey Everybody! [14:04] Hello 😃 [14:04] Sorry we're getting started a bit late. [14:04] Topics: SLC Meetup (March 15th) [14:04] 👋 [14:04] Roadmap breakdown - posted to github [14:05] IPFS (integration) [14:05] greetings 👋 [14:05] So, SLC Meetup on the 15th! [14:05] Great! [14:05] Hi! [14:06] Hi all — a special thanks to the developers and congratulations on an amazing first year!!! # [14:06] <[Dev] Blondfrogs> Hello Everyone! [14:07] We have a tentative agenda with @Tron , @corby speaking. [14:08] We would like to have nice walkthrough of the Raven DevKit for the meetup. [14:08] We are planning on hosting a meetup in SLC at the Overstock building on March 15th from 6:00pm-9:00pm. It is free admission, but there is a page on meetup.com where people can rsvp so that we have a somewhat accurate headcount for food. [14:08] sup guys [14:08] hey russ [14:09] We are planning on having a few speakers and have allotted a bit of time at the end for people to meet and greet each other. [14:09] can you guys link us to the page somewhere when thats available? 😄 [14:10] free food?! [14:10] todays topic? [14:10] yeah can we indicate pepperoni pizza [14:10] Sounds good to me @Jeroz Nothing ordered yet though. 😃 [14:10] only pepperoni pizza is served at true blockchain meetings right [14:10] :blobhide: [14:10] Absolutely. The itinerary just needs to be finalized and then I'll make a broad post about the rest of the details. [14:11] https://www.meetup.com/Salt-Lake-City-salt-lake-city-Meetup/ [14:11] 😭 so far away [14:11] West Coast! [14:11] @MTarget But there's pizza, so worth the travel time. [14:11] lol [14:12] I'll be watching the stream if its available since i'm from montreal/canada 😛 [14:12] Ah yes, I love $300 pizza 😉 [14:12] as long as I get to see your smiling faces @Tron @RavencoinDev then it's worth the time [14:12] We'll be there. [14:12] We'll be messaging additional details as they get finalized. [14:12] Greeting and salutations! [14:12] sup [14:13] Hey, $300 is considerably cheaper than 2 $3,700,000 pizzas. [14:14] Ok, switching topics... [14:14] yeah its a way to fly, [14:14] question is whether those piza's will be paid for in RVN coin or not :ThinkBlack: [14:14] Roadmap [14:14] It hasn't changed, just added some detail. [14:14] https://github.com/RavenProject/Ravencoin/tree/masteroadmap [14:15] nice [14:15] This now links to a breakdown for messaging, voting, anti-spam, and rewards (dividends) [14:15] will there be any additional RPC functionality coming in the future, thinking in terms of some functions that are only available in ravencore-lib [14:15] apologies if now is not time to ask questions, i can wait for later [14:15] "Phase 7 - Compatibility Mode" - that's new 😮 [14:15] The protocol for messaging is pretty well established, but the rest isn't in stone (code) yet. [14:16] can you give us details on compatibility mode? [14:16] In broad brush strokes. [14:17] The idea is to allow ravend to act as a daemon that looks like a single coin. [14:17] so ravend that only works with the bitcoin asset? [14:18] interesting [14:19] So you start it with an option to only work with a single asset/token account or something? [14:19] hmm compelling what is the reason for this? some kind of scale or performance? [14:19] ^ [14:19] Example: Configure ravend to listen for transfer RPC call for senttoaddress or sendfrom, but for a specific asset. This would allow easy integration into existing system for assets. [14:20] Only the daemon or the whole wallet UI? [14:20] yeah thats great, rpc functions dont allow us to do this yet, if i recall [14:20] or at least we depend more on ravencore lib [14:20] so like asset zmq [14:20] that's smart [14:20] @Tron it also sounds like it makes our life easier working with RPC, instead of core all the time for some functionality [14:21] if i understand correctly anyways [14:21] So you could run numerous instances of ravend each on their own network and RPC port, each configured for a different asset. You would need some balance of RVN in each one to cover transaction fees, then. [14:21] id be curious to know what all the advantages are of this [14:21] one more question, how would i decentralize the gateway between bitcoin mainnet/ravencoin mainnet? in the current RSK implementation they use a federated gateway, how would we avoid this? [14:21] it sounds neato [14:21] Just the daemon. The alternative is to get exchanges to adapt to our RPC calls for assets. It is easier if it just looks like Bitcoin, Litecoin or RVN to them, but it is really transferring FREE_HUGS [14:22] That makes sense. Should further increased exchange adoption for each asset. [14:22] hmm yeah its just easier for wallet integration because its basically the same as rvn and bitcoin but for a specific asset [14:22] so this is in specific mind of exchange listings for assets i guess [14:23] if i understand rightly [14:23] @traysi Gut feel is to allow ravend to handle a few different assets on different threads. [14:23] Are you going to call it kawmeleon mode? [14:23] Lol [14:23] I read that as kaw-melon mode. [14:24] same lol [14:24] so in one single swoop it possible to create a specific wallet and server daemon for specific assets. great. this makes it easier for exchanges, and has some added advantages with processing data too right? [14:24] Still keeping a RVN balance in the wallet, as well, Tron. How will that work is sendtoaddress sends the token instead of the RVN? A receive-RVN/send tokens-only wallet? [14:25] @traysi Yes [14:25] sendtoaddress on the other port (non RVN port) would send the asset. [14:25] This will be a hugely useful feature. [14:25] ^ [14:26] @Tron currently rpc function not support getaddresses senttowallet and this has to be done in ravencore lib, will this change you propose improve this situation [14:26] Config might look like {"port":2222, "asset":"FREE_HUGS", "rpcuser":"hugger", "rpcpass":"gi3afja33"} [14:26] how will this work cross-chain? [14:28] @push We'd have to go through the rpc calls and work out which ones are supported in compatibility mode. Obviously the mining ones don't apply. And some are generic like getinfo. [14:28] ok cool 👍 cheers [14:29] for now we continue using ravencore lib for our plans to keep track i just wondering if better way [14:29] as we had some issue after realising no rpc function for getting addresses of people who had sent rvn [14:29] @push | ravenland.org all of the node explorer and ravencore-lib functionality is based on RPC (including the addressindex-related calls). Nothing you can't do with RPC, although I'm not sure of the use cases you're referring to.. [14:29] interesting, so ravencore lib is using getrawtransaction somehow [14:29] i thought this may be the case [14:29] that is very useful thankyou for sharing this [14:30] look into addressindex flag and related RPC calls for functions that operate on addresses outside your wallet [14:30] thank you that is very useful, tbh i am not very skilled programmer so just decoding the hex at the raven-cli commandline was a challenge, i shall look more into this, valued information thanks as this was a big ? for us [14:31] Ok, things have gone quiet. New topic. [14:31] IPFS (integration) [14:31] GO [14:33] ... [14:33] <[Dev] Blondfrogs> So, we have been adding ipfs integration into the wallet for messaging. This will allow the wallets to do some pretty sweet stuff. For instance, you will be able to create your ipfs data file for issuing an asset. Push it to ipfs from the wallet, and add the hash right into the issuance data. This is going to allow for a much more seamless flow into the app. [14:34] <[Dev] Blondfrogs> This ofcourse, will also allow for users to create messages, and post them on ipfs and be able to easily and quickly format and send messages out on the network with ipfs data. [14:34] It will also allow optional meta-data with each transaction that goes in IPFS. [14:34] will i be able to view ipfs images natively in the wallet? [14:34] <[Dev] Blondfrogs> Images no [14:34] We discussed the option to disable all IPFS integration also. [14:35] @russ (kb: russkidooski) Probably not. There's some risk to being an image viewer for ANY data. [14:35] No option in wallet to opt into image viewing? [14:35] cool so drag and drop ipfs , if someone wanted to attach an object like an image or a file they could drag drop into ui and it create hash and attach string to transaction command parameters automatically [14:35] We could probably provide a link -- with a warning. [14:35] nomore going to globalupload.io [14:35] :ThinkBlack: [14:35] I understand that the wallet will rely on globalupload.io. (phase 1). Is it not dangerous to rely on an external network? Or am I missing something? [14:36] hmm [14:36] interesting, i suppose you could hash at two different endpoints and compare them [14:36] if you were that worried [14:36] and only submit one to the chain [14:36] You will be able to configure a URL that will be used as an IPFS browser. [14:36] Oh ic [14:36] you wont flood ipfs because only one hash per unique file [14:36] <[Dev] Blondfrogs> There are multiple options for ipfs integration. We are building it so you can run your own ipfs node locally. [14:36] <[Dev] Blondfrogs> or, point it to whatever service you would like. e.g. cloudflare [14:36] this is very cool developments, great to see this [14:37] Just like the external block explorer link currently in preferences. [14:37] @[Dev] Blondfrogs what about a native ipfs swarm for ravencoin only? [14:37] We have discussed that as an option. [14:37] @push | ravenland.org Considering having a fallback of upload through globalupload.io and download through cloudflare. [14:37] <[Dev] Blondfrogs> @russ (kb: russkidooski) We talked about that, but no decisions have been made yet. [14:37] yeah, i would just use two endpoints and strcompare the hash [14:37] as long as they agree good [14:37] submit tran [14:38] else 'potentially mysterious activity' [14:38] ? [14:38] if you submitted the file to ipfs api endpoints [14:38] Will the metadata just be a form with text only fields? [14:39] and then you would get 2 hashes, from 2 independent services [14:39] that way you would not be relying on a central hash service [14:39] and have some means of checking if a returned hash value was intercepted or transformed [14:39] i was answering jeroz' question [14:40] about relying on a single api endpoint for upload ipfs object [14:40] We have also kicked around the idea of hosting our own JSON only IPFS upload/browse service. [14:41] I have a service like this that is simple using php [14:41] we only use it for images right now [14:41] but fairly easy to do [14:41] Yup [14:42] Further questions about IPFS? [14:43] contract handling? file attach handling? or just text fields to generate json? [14:44] trying to get an idea of what the wallet will offer for attaching data [14:44] Probably just text fields that meet the meta-data spec. [14:44] ok noted [14:44] What do you mean by contract handling @sull [14:45] We won't prevent other hashes from being added. [14:45] asset contract (pdf etc) hash etc [14:45] <[Dev] Blondfrogs> also, being able to load from a file [14:45] got it, thanks [14:47] Let's do some general Q&A [14:48] Maybe just a heads up or something to look for in the future but as of right now, it takes roughly 12 hours to sync up the Qt-wallet from scratch. Did a clean installation on my linux PC last night. [14:48] Any plans or discussions related to lack of privacy of asset transfers and the ability to front run when sending to an exchange? [14:48] ^ [14:48] Is there a way to apply to help moderate for example the Telegram / Discord, i spend alot of time on both places, sometimes i pm mods if needed. [14:49] Any developed plans for Asset TX fee adjustment? [14:49] also this^ [14:49] @mxL86 We just created a card on the public board to look into that. [14:49] General remark: https://raven.wiki/wiki/Development#Phase_7_-_Compatible_Mode = updated reflecting Tron's explanation. [14:49] @mxL86 That's a great question. We need to do some profiling and speed it up. I do know that the fix we added from Bitcoin (that saved our bacon) slowed things down. [14:50] Adding to @mxL86 the sync times substantially increased coinciding with the asset layer activation. Please run some internal benchmarks and see where the daemon is wasting all its cycles on each block. We should be able to handle dozens per second but it takes a couple seconds per block. [14:50] @BW__ no plans currently for zk proofs or anything if that's what you're asking [14:50] You are doing a great job. Is there a plan that all this things (IPFS) could be some day implemented in mobile wallet? Or just in QT? [14:50] i notice also that asset transactions had some effect on sync time as we were making a few. Some spikes i not analysed the io and cpu activity properly but will if there is interest [14:51] we are testing some stuff so run into things i am happy to share [14:51] @BW__ Might look at Grin and Beam to see if we can integrate Mimble Wimble -- down the road. [14:51] yeees [14:51] @J. | ravenland.org work with the telegram mods. Not something the developers handle. [14:51] i love you [14:51] @J. | ravenland.org That would be best brought up with the operators/mods of teh telegram channel. [14:51] @corby @Tron thnx [14:51] @S1LVA | GetRavencoin.org we're planning on bumping fees to... something higher! [14:51] no catastrophic failures, just some transaction too smals, and mempool issues so far, still learning [14:52] @corby i thought that this may happen :ThinkBlack: [14:52] @corby x10? 100x? 1000x? Ballpark? [14:52] Definitely ballpark. [14:52] 😃 [14:52] 😂 [14:52] Is a ballpark like a googolplex? [14:53] @push | ravenland.org asset transactions are definitely more expensive to sync [14:53] yes yes they are [14:53] they are also more expensive to make i believe [14:53] 10,000x! [14:53] as some sync process seems to occur before they are done [14:53] @traysi ★★★★★ thanks for the suggestions we are going to be looking at optimizations [14:53] But, it is way slower than we like. Going to look into it. [14:53] i do not understand fully its operation [14:53] 1000x at minimum in my opinion [14:53] its too easy to spam the network [14:54] yes there has been some reports of ahem spam lately [14:54] :blobhide: [14:54] 😉 [14:54] cough cough ravenland [14:54] @russ (kb: russkidooski) we're in agreement -- it's too low [14:54] default fee 0.001 [14:54] ^ something around here [14:54] @corby yep we all are i think [14:55] waaay too low [14:55] meaningful transactions start with meaningful capital expense [14:55] though there is another scenario , there are some larger volume, more objective rich use cases of the chain that would suffer considerably from that [14:55] just worth mentioning, as i have beeen thinking about this a lot [14:55] there are some way around, like i could add 1000 ipfs hashes to a single unique entity, i tested this and it does work [14:56] @russ (kb: russkidooski) What would you suggest. [14:57] I had a PR for fee increase and push back. [14:57] Ignore the push back. 0.001 RVN is not even a micro-farthing in fiat terms [14:57] definitely around 1000x [14:57] Vocal minority for sure [14:57] ^ yep [14:57] @russ (kb: russkidooski) That sounds reasonable. [14:57] Couple hundred Fentons [14:58] right now an asset transaction is 0.01 of a penny essentially [14:58] 1 RVN would work now, but not when RVN is over $1. [14:58] yes exactly [14:58] Hi. Late to the party. [14:58] We are also talking about a min fee. The system will auto-adapt if blocks fill up. [14:58] im thinking tron, some heavy transaction use cases would fall out of utility use if that happened [14:58] so whats the thinking there [14:59] is there a way around the problem, bulked ipfs hash transactions? [14:59] 1000x would put us around btc levels [14:59] maybe a minimum 500x? [14:59] @russ (kb: russkidooski) Agreed. [14:59] <[Dev] Blondfrogs> It is time to wrap it up here. Everyone. Thank you all for your questions and thoughts. We will be back in 2 weeks. 😃 [14:59] Small increase and review. [14:59] Thanks all! [14:59] Cheers. [15:00] yeah sorry for 1 million questions guys hope i didnt take up too much time [15:00] cheers all 👍 [15:00] Thanks everyone [15:00] Thanks everyone for participating!!! [15:00] That is what we are here for [15:00] 100x-500x increase, 1000x maximum [15:00] 🍺

submitted by Chatturga to Ravencoin [link] [comments]

[Guide] Python-Trezor on cold offline Raspberry Pi

I am happy to report that the python-trezor command line scripts work successfully on a Piper which is really a Raspberry Pi running Debian wheezy.
This does require you to connect your Piper online initially, so I recommend buying a new 4GB SD card and flashing the piper firmware if you have already used piper to generate cold offline keys. You'll need this for the hexagonal screws and this for the wiring
You can download the latest firmware ISO here and here is how you burn the image
From there I did sudo apt-get update and installed the Trezor dependencies including cython, libusb, python-trezor, cython-hidapi, trezor-common and ran sudo python setup.py build/install as per these 2 guides edit : and pip install trezor as per stickac (I have not yet tried the electrum 2 beta parts of the guides, as I don't require cold offline electrum 2)
https://bitcointalk.org/index.php?topic=122438.msg9262821#msg9262821
http://www.reddit.com/TREZOcomments/2jp9uk/tutorial_install_electrum_20_beta_with_trezo
This still does not install the english wordlist which you will need to do manually.
Edit : Adding BIP39 library should also install english.txt
You might also want to download my hidden passphrase/PIN entry python-trezor fork
Lastly I needed to unplug the USB mouse from my keyboard hub, in order to provide Trezor with adequate power.
Confirm that everything is working
./cmdtr.py list
./helloworld.py
Pull out the Ethernet cable, and never plug it back in (without first wiping the SD card)
Congratulations you can now initialize and restore Trezor - in a fully cold offline environment - and if you wish, provide your own entropy
Expert tips :
Delete your shell history
semi-securely delete files off SD flash
Version 2 :
I have added support for the latest electrum 2.0 beta, trezor support and btchip support
Update to the newest github versions
navigate to /python-trezor and git pull navigate to /python-mnemonic and git pull
Update libraries
sudo apt-get update sudo apt-get upgrade sudo apt-get install -f 
Install dependencies
sudo apt-get install python-qt4 python-dev pyqt-dev-tools python-pip sudo apt-get install python-usb libusb-dev sudo pip install --upgrade pyusb 
Install btchip support
mkdir btchip cd btchip get https://hardwarewallet.com/zip/add_btchip_driver.sh sudo bash add_btchip_driver.sh git clone https://github.com/btchip/btchip-python cd btchip-python sudo python setup.py install 
Tests
cd samples python getFirmwareVersion.py cd ../btchip python btchipPersoWizard.py 
btchipPersoWizard.py should bring up a GUI setup wizard if core.usb is setup properly
cd ../.. git clone https://github.com/btchip/btchip-c-api.git cd btchip-c-api mkdir bin make cd bin ./btchip_getFirmwareVersion 
Install electrum 2.0 Beta
git clone https://github.com/spesmilo/electrum cd electrum sudo python setup.py install pyrcc4 icons.qrc -o gui/qt/icons_rc.py python setup.py sdist --format=zip,gztar electrum 
File > New > Hardware wallet. Both Trezor and btchip work as they do on OSX, apart from the Pi's slow CPU taking ages to generate the HD tree and Sync.
Limitations
At this stage a Pi is too slow to receive btchip's 2fa OTP confirmation code, with the auto-type saturating the text buffer. I'm confident Nicholas can fix this in firmware. Edit: an ipad2 + Apple CCK is too slow to buffer the seed about 1/4 times. Edit 2: an iPhone5/retina iPad mini + Lighning to USB camera cable works with btchip with iOS 8.1 with selected text editors.
You can use btchipPersoWizard.py to restore a BIP39 mnemonic, however btchip's HW1 is unable to support on-device BIP39 seed+passphrase, but this feature might be added to the electrum plugin later.
I don't know if greenaddress CRX will work on piper, there doesn't seem to be an official armhf build available from google, and the latest sudo apt-get install chromium version is v22 whereas Chrome is at v38. (it might be possible to download https://github.com/greenaddress/WalletCrx and pack/drag-drop the extension manually in developer mode)
submitted by Aussiehash to Bitcoin [link] [comments]

How To Quickly Sync A Wallet with Bootstrap (Litecoin/Bitcoin) Increase slow download and sync of bitcoin blockchain on Mac Bitcoin Core Wallet sync 100% result Syncing bitconnect wallet with network. Bitconnect wallet (not sync) *fix*. Bitcoin Core

While there are a few enthusiasts who are experimenting with building applications, there is still one missing piece of that puzzle and that is to be: scalability. What that means is that blockchains are limited in their ability to scale. Of cours... Hi, Anyone got a idea what's the issue possibly? It's synchronising super slow! I've tried with version 0.12.1 and 0.12.0 cannot finish sync. It keeps getting stuck with about 2.5 to 1.5 years to go. This is using the Windows 64bit binaries. I've verified upnp is working and I can be connected to externally. I've attempted to eject slow peers and the entire list to get new ones. I've also deleted my peers.dat to get it ... Follow the steps below to enable prune mode in Bitcoin core wallet. 1. First locate your wallet configuration file. If you don’t find bitcoin.conf file in your Bitcoin directory then create one. 2. Open wallet, go to settings >> options and click on open configuration file. 3.The config file will be mostly empty. Now close your wallet and in the config file input the following. prune=550 ... Bitcoin Core should also work on most other Unix-like systems but is not as frequently tested on them. It is not recommended to use Bitcoin Core on unsupported systems. From Bitcoin Core 0.20.0 onwards, macOS versions earlier than 10.12 are no longer supported. Additionally, Bitcoin Core does not yet change appearance when macOS “dark mode ...

[index] [43003] [12058] [1986] [47261] [15418] [3134] [30543] [7704] [41574] [17416]

How To Quickly Sync A Wallet with Bootstrap (Litecoin/Bitcoin)

How to Recover Missing Bitcoins / Not Showing Up While Wallet Syncing ... How to Setup and Sync Bitconnect-Qt Wallet on macOS - Duration: 4:27. Alex Vinnitsky 3,643 views. 4:27. Rupee - Replacing ... How to Recover Missing Bitcoins / Not Showing Up While Wallet Syncing - Duration: 7 ... m1xolyd1an 39,529 views. 7:03. Bitcoin-QT wallet review - Duration: 8:53. Secure Your Wallet 5,110 views. 8 ... bitcoin p=np forum.bitcoin. pl bitcoin qt bitcoin qr code bitcoin qt synchronizing with network bitcoin qt wallet location bitcoin qt import wallet bitcoin qt synchronizing with network slow ... How to Recover Missing Bitcoins / Not Showing Up While Wallet Syncing - Duration: 7:03. m1xolyd1an 36,668 views. 7:03. Language: English Location: United States Restricted Mode: Off History Help ... Bitcoin-QT wallet review - Duration: 8 ... How to Recover Missing Bitcoins / Not Showing Up While Wallet Syncing - Duration: 7:03. m1xolyd1an 40,077 views. 7:03. How to mine bitcoins (solo mining ...

#